Tuesday 17 July 2012

Tutorial - Printing on Fabric using Inkjet Transfer Paper

 
I have been dying to have a go at printing French style graphics and typography onto fabric for a while now, having been inspired by the graphics from The Graphics Fairy , Vintage Feedsacks, and by some of the lovely makes I have seen on some US blogs such as The Shabby Creek Cottage, and the projects section of The Graphics Fairy. 


There appear to be numerous ways of achieving this and I aim to try a few of those. This Tutorial deals with  using Inkjet Transfer Paper and an inkjet printer.  NB: For those with a printer which uses toner, I have come across another method which I will be trying out soon, and if it works I will do a tutorial.

So the other day I had a go (my last two posts show some of the end results!), having already got myself prepared by buying some Iron-on Transfer Paper* (for light colours), and by browsing and downloading lots of gorgeous graphics from both The Graphics Fairy and Vintage Feedsacks.

*Note about buying Iron-on Transfer paper - I found the best value paper was on eBay and paid  round about £7 for 20 sheets - there may be even better buys out there. WHSmiths charge £14 for 5 sheets!

OK, so here we go!

Equipment
Iron on Transfer Paper (for white or light coloured fabrics) 
Inkjet printer
Down loadable Graphics or other design images
Iron
Hard surface such as a wooden chopping board or kitchen table
Two teatowels or folded pillowcase (for the ironing stage)
Fabric (atleast 50% cotton content)

Method

1. Prepare the image

I used Word for this, and opened a new blank document then clicked on Insert, then Picture, then found the image I wanted by browsing My Pictures to where I had  saved the images. I clicked on the image I wanted and clicked on insert.

 

I then re-sized the image to get the size I wanted by clicking on the image and dragging it using the arrows. If you want to you could copy the image to make best use of the paper (see below), depending on the size of image you want.

NOTE: If your image contains text, it is important to reverse the image to create a mirror image otherwise the text will come out wrong!   ie. When you have reversed it, it will look wrong on screen and wrong when you print it, but once it is ironed on it will read correctly!


It  is not so important if it is just a picture, although it will come out the opposite from what you see on the screen unless you mirror image it. See Cockerel example below.


 
To create a mirror image in Word, go to Page Layout then at the right hand side of the screen find "Rotate" then click on "Flip Horizontal" to reverse the image. This way the text will come out correct when transferred onto your fabric (don't forget, it will look wrong on screen and when you print off the paper )



NB: I found it was best to add text to an image using something like Picasa or other photo editing software rather than in Word itself ( if using Word) , as I found that text boxes and word art would not "flip" when attached to the image - the image flipped but the words wouldnt! So for the book cover (see a previous post and the image later in this tutorial) I added text to my image in Picasa, then inserted the image into Word, then the whole lot "flipped" OK!
Now you are all set to do a test print on ordinary paper.

2. Print the Image onto Transfer paper

Do a test print on ordinary paper first to make sure the size etc is as you want it, and that all of the image will be printed, then once you are happy, set the Print options as per the Transfer paper instructions and according to your printer - mine said set to Transfer Mode or Plain Paper Best Quality, but I used Speciality Paper setting (as I didnt have transfer mode) and it worked fine.

 
NB: Make sure you insert the transfer paper correctly into the paper tray as per the instructions on your Paper pack so that it prints out on the correct side.

I used this paper below which I bought on eBay for approx £7 for 20 sheets.



3. Cut around Image 

So, print out your image on the Transfer paper, then let it dry as per instructions, then cut around the image

 
I have found it best to cut as close as possible to the design otherwise you can see a faint mark where the blank paper has been ironed on. This is more obvious on pure white cotton (see below) but was less noticeable on natural coloured fabric. I have yet to do a test wash to see if this goes on washing.



4. Iron Image onto Fabric
Next, set your iron to its hottest setting - from this stage on,  follow the instructions for your paper in case  they differ from mine!

 
Place  a large cutting board on your worktop or table to protect it, then lay a couple of tea towels or a folded pillowcase over it. An ironing board will not provide a hard enough surface.

 
Following the packet instructions, position your image ink side down and checked paper uppermost. Press carefully with the hot iron according to the time on the instructions - mine said for about 1 minute, making sure you press over all the edges and the whole area.

 
5. Peel off backing paper

Allow image to cool. This is most important, as one image I did I was too impatient and peeled it back too soon and it left a rough area and nearly spoilt the design.

Peel back the top paper layer smoothly and all in one go - this is also important I found -  as I was pausing to take these action shots, when i re-started peeling back the paper I noticed it left lines in the print where I had paused.

 
Ta da!!!!!  C'est tout!!!

Then make fabric up into what ever takes your fancy - me? I made cushions of course!  

Oh, and a book cover, already featured in an earlier post here! This beautiful image was from Vintage Feedsacks .





I tried various fabrics - an antique linen sheet, osnaburg, and for the cushion I made up and showed in my last post, I used some cheap, loosely woven  100% cotton fabric cut from a decorating cloth.

 
The transfer paper I used creates images washable at 40 degrees (turn inside out) but they must be protected when ironed by non stick baking paper, peeled off whilst still warm.

Well, thats it! Simples!!!

Hope it made some sense, if you have any questions or queries please shout out!


 

 
above and below printed on osnaburg, a natural 100% cotton - it worked beautifully on this and the unprinted part of the transfer was scarcely noticeable.

 


NB: All motifs shown here from either The Graphics Fairy or Vintage Feedsacks.

Posted by Picasa

Saturday 14 July 2012

French Fancy

 
Using some wonderful free graphics that I found over at The Graphics Fairy, I have been having a bit of fun this week in between dodging the rain showers, doing the school run, dog walking, and the usual day to day "stuff" .


 

 

 
If anyone is interested, I have prepared a tutorial showing what I did (and the mistakes and pitfalls!) and as I am currently experimenting with some other different methods I may do more tutorials if anyone would be interested.

Please leave a comment if you might be interested in seeing these.

 

 

 

So, any excuse NOT to get back on with what I should be doing, which is finishing painting the walls white in the sitting room before the new loose covers arrive.

Soon the next distraction will be new curtains or roman blinds - at the moment, as I could not bear to put back the old curtains we inheirited when we bought the house once I'd started to paint the room (and which we have lived with as they "matched" the rather dark gold walls that I have now finally painted over), and not wanting to start the curtain/fabric search just yet, I have temporarily hung two mismatched pairs of old floral curtains.



My 17 year old daughter thinks we should keep it like this as they are "cute" and its different to have non-matching floral pairs - hmm, I don't think so!


Wishing you all a very Happy Weekend, and thanks for visiting.




Posted by Picasa

Thursday 12 July 2012

Cover Up

 
What started out as a notebook cover.....
then didn't work out as I miscalculated the fabric required in my haste to make it...........
has ended up as a book cover, ideal for covering up those frivolous lightweight novels that we all like to indulge in once in a while!

 

 
made from a damaged antique french sheet with a pretty vintage print added
(graphic courtesy of  Vintage Feedsacks blog - there are some wonderful images there)

 

 
(My favourite reading spot on the landing by the window when the weather is wet, or in the evening, with a pretty vintage "Comfy" quilt ready to snuggle under if it's a bit chilly.)

 
lined with gingham


and have just added a woven linen ribbon bookmark







 

 
So when things don't turn out as planned it isn't always a bad thing - I can now appear to be reading a serious treatise on Roses whilst really skipping through the latest aga saga.

Thanks for all your comments on my last posts ..... it's interesting to hear how parts of  the USA are experiencing heatwaves, whilst much of northern Europe is wading through puddles and experiencing similar weather to Australia who are approaching winter!

Happy days!


Posted by Picasa

Tuesday 10 July 2012

When its wet outside.....

 

what more excuse is needed to settle down for a little while with a hot drink and something naughty to eat......

 
and browse through a few new books......

 

 

 
as well as a few older favourites.......

 

 
and maybe indulge in a spot of hand sewing.......

 

 

 

 in the company of a good friend



Thank you everyone for taking the time to leave comments on my posts - it is lovely to read them all, and I do appreciate them so much. I try to reply to all of them via email (unless they are the "no-reply" ones) and also to visit your own wonderful blogs.

There are a few lovely Giveaways taking place at the moment in Blogland - have a look in my sidebar at the top of my blog to link to Madelief and Mimi and Tilly's blogs to join in their wonderful Giveaways.






 
Posted by Picasa